Coatability Table and Coating Interval by Paint Type

• • Coatability Table and Coating Interval by Paint Type

    1. Coatability Table

    Top coat / Primer	Wash primer	Epoxy zinc	Inorganic zinc	Oil type	Alkyd type	Phenol MIO type	Chlorinated rubber type	Vinyl chloride type	Epoxy type	Modified epoxy type	Tar epoxy type	Urethane type	Heat-resistant silicone type
    Wash primer	○	X	X	○	○	○	○	○	△	△	△	○	X
    Epoxy zinc	○	○	X	X	X	○	○	○	○	○	○	○	△
    Inorganic zinc	○	○	X	X	X	○	△	○	○	○	○	△	○
    Oil type	X	X	X	○	○	○		X	X	X	X	X	X
    Alkyd type	X	X	X	○	○	○	△	X	△	△	△	△	X
    Phenol MIO type	X	X	X	○	○	○	○	X	X	X	X	X	X
    Chlorinated rubber type	X	X	X	X	△	△	○	△	△	△	X	△	X
    Vinyl chloride type	X	X	X	X	X	○	△	○	X	X	X	X	X
    Epoxy type	X	X	X	△	△	△	○	X	○	○	○	○	X
    Modified epoxy type	X	X	X	△	△	△	○	X	○	○	○	○	X
    Tar epoxy type	X	X	X	△	△	△	△	X	△	△	○	△	X
    Urethane type	X	X	X	△	△	△	△	X	△	△	△	○	X
    Heat-resistant silicone type	X	X	X	X	X	X	X	X	X	X	X	X	○

    O : Coatable, △ : Coatable depending on conditions (apply after making an inquiry), × : Not Coatable
    ※ The above items are general conditions. Therefore, it is necessary to confirm the coatability with our technical department for the special coating system.

    2. Coating Interval

    Under coat type	~ Top coat type	Coating interval (20℃-75%) Shortest to longest
    Long Edge Etching Primer	~ Zinc type rust-resistant paint	1 day ~ 3 months
    Zinc rich paint	~ Epoxy primer paint (mist coat)	1 day ~ 10 months
    Thick film zinc rich paint	~ Epoxy primer paint	2 days ~ 12 months
    Zinc type rust-resistant paint	~ Zinc type phthalic acid anti-rust paint	2 days ~ 6 months
    Zinc type phthalic acid anti-rust paint	~ Phthalic acid intermediate coating	1 day ~ 6 months
    Phthalic acid intermediate coating	~ Phthalic acid top coat	1 day ~ 10 days
    Phthalic acid anti-rust paint	~ Phenol MIO	2 days ~ 6 months
    Phenol MIO	~ Chlorinated rubber intermediate coating	2 days ~ 12 months
    Chlorinated rubber primer paint	~ Chlorinated rubber intermediate coating	1 day ~ 12 months
    Chlorinated rubber primer paint	~ Chlorinated rubber intermediate coating	1 day ~ 1 months
    Epoxy primer paint	~ Chlorinated rubber intermediate coating	1 day ~ 7 days
    Epoxy primer paint	~ Epoxy intermediate coating	1 day ~3 months
    Epoxy MIO	~ Epoxy intermediate coating	1 day ~ 12 months
    Epoxy intermediate coating	~ Polyurethane top coat	1 day ~ 7 days
    Epoxy intermediate coating	~ Fluorine top coat	1 day ~ 7 days
    Tar epoxy	~ Tar epoxy	1 day ~ 7 days
    Vinyl ester	~ Vinyl ester	1 day ~ 7 days

    The data show general coating intervals. If the maximum recoatable time in the catalog for the product has elapsed, make sure to contact the relevant technical department before carrying out coating.